Potential Acoustic Gain

For a simple sound reinforcement system where the sound is assumed to drop off according to the inverse square law and the microphones and speakers are assumed to be omnidirectional, then the maximum achievable gain is determined by strictly geometric considerations. This simple case provides the framework for assessing what can be done in a real auditorium to increase the possible gain before feedback takes control.

CalculationDerivation of expression
More detail about how to increase P.A. G.
Index

Sound reproduction concepts
 
HyperPhysics***** Sound R Nave
Go Back








Developing the Potential Acoustic Gain Expression

The maximum amplified level at the listener is

Show

so the maximum gain in decibels is

and bringing out the exponent gives

Calculate
Index

Sound reproduction concepts
 
HyperPhysics***** Sound R Nave
Go Back
















P.A.G. Expression Development

According to the inverse square law, the sound intensity at the listener without amplification is

and level at the listener which corresponds to giving a feedback level equal to the input is shown below.

This inverse square law expression gives the level at the listener if the loudspeaker is returning exactly the same level IM to the microphone that was originally produced at the microphone by the sound source. That is, it is returning exactly as much as it got as input so that there is a closed loop of signal returning to the microphone.

The ratio of these two levels is the maximum gain before reaching the feedback condition. This ratio is used to develop the P.A.G. expression.

Potential Acoustic GainCalculation
Index

Sound reproduction concepts
 
HyperPhysics***** Sound R Nave
Go Back








Potential Acoustic Gain Calculation

For distance values

DS =m
=ft

D1 =m
=ft

D0 =m
=ft

D2 =m
=ft

= dB

You may enter values for the relevant distances in the simplified sound amplification system. Unspecified values will default to the values in the example model. You can change any values to convince yourself that the P.A.G. can be increased by increasing the distance from microphone to loudspeaker. The gain can also be increased by decreasing the distance from loudspeaker to listener or the distance from the source to the microphone.

Simplified Amplification SystemPotential Acoustic Gain
Index

Sound reproduction concepts
 
HyperPhysics***** Sound R Nave
Go Back